The Raymond Centriline Process of cement mortar lining is applied to new and existing pipelines to extend the original design life of the pipeline by preventing internal corrosion.
The lining can be applied either in-situ after the pipes have been installed or in a stackyard adjacent to the project prior to installation. Linings can either be cement mortar lining consisting of ordinary Portland cement mortar, ideal for potable water, or specialist chemically resistant mortars for wastewater projects which are subject to hydrogen sulphide attack.
On site application techniques used in refurbishment of existing pipelines are designed using trenchless technology with the minimum amount of traffic disruption.
The Centriline Process can be used in pipes with a diameter as small as 75mm and in tunnels up to 6000mm diameter.
Linings can be modified with microsilica fume for less permeability and enhanced erosion resistance suitable for use in seawater transmission and water injection pipelines.
H2S (Hydrogen Sulphide) resistant mortars consisting of calcium aluminate cements and synthetic aggregates are applied to pipelines and sewers to reduce the corrosive action of the effluent.
Pipeline Coating Is A Cost-effective And Sensible Solution That Is Done Purposely To Maintain Pipelines' Integrity. This Coating Helps In Providing A Constant Protective Lining That Helps In Saving Pipelines From The Damaging Effects Of Corrosion
Powder Coating For Fencing & Grills
Powder Coating Is A Type Of Coating That Is Applied As A Free-flowing, Dry Powder. Unlike Conventional Liquid Paint Which Is Delivered Via An Evaporating Solvent, Powder Coating Is Typically Applied Electrostatically And Then Cured Under Heat Or With Ultraviolet Light.
Hot Dip galvanizing for steel
Hot-dip Galvanization Is A Form Of Galvanization. It Is The Process Of Coating Iron And Steel With Zinc, Which Alloys With The Surface Of The Base Metal When Immersing The Metal In A Bath Of Molten Zinc At A Temperature Of Around 449 °C (840 °F).
PVC, is an alternative coating material to plastisol coating. PVC resin is typically hard and inflexible, and yet when mixed with a plasticizer additive, it becomes more flexible, and thus is a popular material choice for dip coating.
Fusion bonded epoxy coating, also known as fusion-bond epoxy powder coating and commonly referred to as FBE coating, is an epoxy-based powder coating that is widely used to protect from corrosion steel pipe used in pipeline construction, concrete reinforcing bars and on a wide variety of piping connections, valves etc.
We supply comprehensive and complete range of products for cathodic protection specialized for Oil and Gas industry. We are committed to provide cost effective Cathodic Protection solutions to meet each customer’s specific requirements. Corrosion protection is an essential component in the maintenance of all steel-based assets. Where pipelines and underground storage tanks are involved, the application of appropriate corrosion management will ensure assets integrity vis-a-vis safe and reliable supply of products such as gas, oil and water.